SSCH60-4000/15000 New Energy Motor Electric Dynamometer Test Bench
SSCH60-4000/15000 New Energy Motor Electric Dynamometer Test Bench Description
Under the trend of miniaturization and lightweighting of new energy vehicles, 60-kilowatt motors have become the core power source for urban logistics vehicles and small passenger cars. The 60-kilowatt new energy motor electric dynamometer test bench, providing all-round performance verification for motor research and development and production through precise working condition simulation and efficient data collection.
The new energy motor test bench is designed with a power of 60 kilowatts as its core. It can simulate typical conditions such as urban road congestion start-stop and suburban road cruise, and supports motor-electric/power generation bidirectional mode tests. When the motor is in an energy recovery state (such as downhill braking), the test bench can feed more than 85% of the regenerative power back to the grid, reducing the test's energy consumption and realistically recreating the vehicle's energy management scenario.
SSCH60-4000/15000 New Energy Motor Electric Dynamometer Test Bench Components
1. 60kW AC asynchronous electrical dynamometer
•
An air-cooled asynchronous motor, with a maximum torque of 500N · m (@1000r/min) and it is equiped with a torque sensor with ± 0.2%FS accuracy, it can dynamically simulate the load changes of frequent starts and stops of urban vehicles
•
With a two-level inverter, the switching frequency is 8kHz, enabling smooth speed adjustment from 0 to 15000r/min
2. Unidirectional DC power system
•
Rated power 75kW, voltage regulation range 150-600V, supports constant voltage/constant current control mode
•
Built-in lead-acid battery simulation algorithm, which can reproduce the discharge characteristics of low-speed electric vehicle batteries at different power levels
3. Independent cooling system
•
The dynamometer is air-cooled, and the test motor is equipped with a water cooling loop, with coolant being 50% ethylene glycol water solution
•
Flow control range 3-30L/min, temperature control accuracy ±1 ° C, avoiding thermal interference between different components
4. Intelligent control system
•
The upper computer system developed based on Windows integrates standard cycles such as CLTC city condition and ECE-R101 energy consumption test
•
It can collect 15 parameters such as torque and rotational speed in real time. The data sampling frequency is 5kHz and it supports CAN/LIN bus communication
SSCH60-4000/15000 New Energy Motor Electric Dynamometer Test Bench Key Technical Parameters
| System Module | Technical Specifications |
| Dynamometer | Rated power: 60kW; Maximum speed: 15000r/min; Peak torque: 650N · m |
| DC power supply | Voltage range: 150-600V; Maximum current: 150A; Regulation accuracy: ±1% |
| Power analyzer | Voltage accuracy: 0.1% FS; Current accuracy: 0.05% FS; Power factor: -1 to +1 |
| Cooling system | Maximum cooling power: 15kW; Temperature control: -5 ° C to 100 ° C; Flow accuracy: ±2% |
| Dynamic response | Torque response time: < 8ms; Speed stabilization time: < 30ms |
SSCH60-4000/15000 New Energy Motor Electric Dynamometer Test Bench Technical Features
1. Precise working condition simulation capability
Through the dynamic torque loading algorithm, the torque variation during the 0-60km/h acceleration process on urban roads can be reproduced, with the fluctuation controlled within ±2%, meeting the requirements for dynamic performance testing of motor controllers.
2. Wide temperature adaptability test
Optional -30 ° C to 80 ° C environmental chamber, combined with humidity control of 20% to 85% RH, to test the performance of the motor in different climate zones, temperature rise test accuracy ±1.5 ° C.
3. Basic fault simulation function
Supports simulating six common types of faults such as motor phase loss and abnormal sensor signals to help developers optimize motor protection strategies.
4. Efficiency analysis tools
Built-in motor efficiency MAP generation function, automatically plotting efficiency curves under different operating conditions, supporting data comparison with similar products, assisting in optimization design.
SSCH60-4000/15000 New Energy Motor Electric Dynamometer Test Bench Typical Application Areas
1. Motor testing for small passenger vehicles
It is applicable to the drive motor test of A0-class pure electric sedans and urban mobility vehicles, and can complete the rated power, efficiency and other test items stipulated in GB/T 18388.
2. Urban logistics vehicle development
Support motor performance verification for electric logistics vehicles under 4.5 tons, simulating frequent start-stop, low-speed climbing and other working conditions in urban distribution.
3. Low-speed special vehicles
Provide durability tests for the motors of low-speed vehicles such as electric sightseeing vehicles and site transport vehicles, which can operate under heavy load conditions for 8 consecutive hours.
4. Motor controller matching
Optimizing motor and controller parameters on the bench, such as adjusting the control strategy at 12,000 r/min high speed, can increase motor efficiency by 2 to 3 percent and extend vehicle range.
SSCH Series Models Parameter Information
| Model | Power (KW) | Torque (Nm) | Rated Speed (rpm) | Max Speed (rpm) | Torque Measurement Accuracy |
| SSCH30-4500/18000 | 30 | 64 | 4500 | 18000 | 0.2%FS |
| SSCH45-4500/18000 | 45 | 95 | 4500 | 18000 | 0.2%FS |
| SSCH60-4000/15000 | 60 | 143 | 4000 | 15000 | 0.2%FS |
| SSCH90-4000/15000 | 90 | 215 | 4000 | 15000 | 0.2%FS |
| SSCH110-4000/15000 | 110 | 263 | 4000 | 15000 | 0.2%FS |
| SSCH160-4000/15000 | 160 | 382 | 4000 | 15000 | 0.2%FS |
| SSCH200-4000/12000 | 200 | 477 | 4000 | 12000 | 0.2%FS |
| SSCH250-4000/12000 | 250 | 597 | 4000 | 12000 | 0.2%FS |
| SSCH300-4000/10000 | 300 | 716 | 4000 | 10000 | 0.2%FS |
| SSCH350-4000/10000 | 350 | 836 | 4000 | 10000 | 0.2%FS |
| SSCH400-4000/10000 | 400 | 955 | 4000 | 10000 | 0.2%FS |
| Can be customized |
Company Profile
Seelong Intelligent Technology (Luoyang) Co., Ltd. is a high-tech enterprise specializing in equipment measurement, control, design, manufacturing, and sales services for power engineering systems in various fields such as aerospace, automotive, and new energy; The company is located in the beautiful peony city of Luoyang.
Seelong specializes in the research and development, production, and service of testing equipment for new energy motors, hybrid power systems, engines, transmissions, and more. Our main products include electric dynamometers, measurement and control systems, DC power supplies, and working condition guarantee systems. Seelong has a complete sales and service system, adhering to the business philosophy of providing fine quality services for survival and keeping on renovation for development, and providing users with various types of power engineering measurement and control solutions in various fields.
Seelong's advanced design philosophy and rich industry experience give the company a technological Advantages ahead of competitors in the same industry, and the company's products can better meet the actual market demand. Seelong is brave in innovation. While valuing its own technological breakthroughs and development, it has established long-term and in-depth cooperative relationships with multiple domestic research institutions such as Tsinghua University and Shandong University. It has passed CE certification, ISO9001 quality system certification, AAA level enterprise certification, obtained more than ten invention patents, and two software copyrights. It has provided professional equipment and services to more than a hundred users both domestically and internationally, The enterprise has won the trust of domestic and foreign customers with its cost-effective products and high-quality services, and has established a long-term win-win strategic partnership.
The company always adheres to the business philosophy of "taking technological innovation as its mission and quality service as its purpose", constantly surpassing the advanced level in the same industry, integrating into the world, measuring and controlling the future, and creating high-quality products. To provide customers with products and services with high intelligence, precision, speed, reliability, and added value.
All employees of Seelong Intelligent Technology (Luoyang) Co., Ltd. warmly welcome sincere cooperation from domestic and foreign customers, and work together for the future and common development.
Company Certificates
FAQ
Q: What's the minimum order quantity for our cooperation?
A: We support small trail order of 1 pcs for stock products.
Q:How can I learn more about the products?
A: Please leave your email and we will send you your electronic sample book.
Q: What's your payment term?
A: Normally 40% T/T deposit, pay in full before shipment.
Q:What's the lead time for my orders?
A: Dynamometers production cycle is 6-8 weeks, sensors production cycle is 2-3 weeks, other products please contact with us.
Q: How do we get the overall solution of the test bench?
A: Leave us your email, our technical staff will communicate with you about the detailed plan.
Q: Can I come to visit your factory?
A: Sure, you are always welcomed to have a visit.
Product Tags:
|
|
SSCH60-4000/15000 650Nm 0.2%FS New Energy Motor Electric Dynamometer Test Bench Images
|
